Managed PoE+ Gigabit Switch with SFP+Models: ES-48-500W, ES-48-750W
Accessing the Configuration InterfaceThe EdgeSwitch is set to DHCP by default, so it will try to automatically obtain an IP address. If that fails, th
Fallback IP Address1. Ensure that your computer (or other host machine) is connected to the EdgeSwitch.2. Configure the Ethernet adapter on your hos
5. The EdgeSwitch Configuration Interface will appear. Go to System > Connectivity > IPv4.6. Change the IP Address to a unique IP address or s
Configuring PoE SettingsThe PoE settings for ports 1-48 are set to PoE+ auto by default, so 802.3af/at devices can be plugged in and automatically rec
SpecificationsEdgeSwitchDimensions485.04 x 44.45 x 347.6 mm (19.1 x 1.75 x 13.69")WeightES‑48‑500W ES‑48‑750W6.1 kg (13.5 lb) 6.5 kg (14.3 lb)Tot
Safety Notices1. Read, follow, and keep these instructions.2. Heed all warnings.3. Only use attachments/accessories specified by the manufacturer.W
Limited WarrantyUBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from de
ReturnsNo Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS d
Limitation of LiabilityEXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE
ComplianceFCCChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the eq
IntroductionThank you for purchasing the Ubiquiti Networks® EdgeSwitch™. This Quick Start Guide is designed to guide you through the installation and
RoHS/WEEE Compliance StatementEnglishEuropean Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging
EspañolLa Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junt
Declaration of ConformityČesky [Czech]UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal
Italiano [Italian]Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS device, è conforme ai requisiti essenziali ed alle altre dis
www.ubnt.com©2014 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, UbiquitiNetworks, the Ubiquiti U logo, the Ubiquiti beam logo, EdgeMAX, Edge
Installation Requirements• Phillips screwdriver• Standard‑sized, 19" wide rack with a minimum of 1U height available• For indoor applications,
LED State StatusSystemWhite Ready for UseBlueBootup in ProgressFlashing Indicates Reset to Factory DefaultsRJ45 1‑48PoEOff No PoEAmber IEEE 802.3af/at
Front Panel ButtonResetButton DescriptionResetThere are two methods to reset the EdgeSwitch to factory defaults:Runtime Reset (Recommended)The EdgeSwi
Front Panel PortsRJ45 1-48SFP 1-2SFP+ 1-2Interface DescriptionRJ45 1‑48RJ45 ports support Power over Ethernet (PoE) and 10/100/1000 Ethernet connectio
Hardware Installation1. Connect the Power Cord to the Power port of the EdgeSwitch.2. Attach the EdgeSwitch to the rack using the four Mounting Scre
3. Connect the other end of the Power Cord to a power outlet.Connecting Ethernet1. Connect an Ethernet cable from your computer or host system to an
Using SFP+ and SFP PortsThese ports support the specified module types at the following speeds:Ports SFP+ Module Type SFP Module TypeSFP+ 1‑2 10 Gbps
Comments to this Manuals