Ubiquiti UniFi User's Guide download pdf (Page 4)

Hardware Overview

Ports Panel

Interface Description

Console

RJ45 serial console port for Command

Line Interface (CLI) management. Use a

RJ45-to-DB9, serial console cable, also known

as a rollover cable, to connect the Console

port to your computer. Then configure the

following settings as needed:

• Baud rate 115200

• Data bits 8

• Parity NONE

• Stop bits 1

• Flow control NONE

Reset

Resets to factory defaults. The UniFi Security

Gateway should be powered on. Press and hold

the Reset button for about 10seconds until the

right LED on the VOIP port starts flashing and

then becomes solidly lit. After a few seconds,

the LED will turn off, and the UniFi Security

Gateway will automatically reboot.

WAN

Supports 10/100/1000 Ethernet connections.

Default setting is DHCP client.

LAN

Supports 10/100/1000 Ethernet connections.

Default setting is DHCP Server.

Server IP: 192.168.1.1/24

VOIP Disabled and reserved for future use.

1 2 3 4 5 6 7 8 9 ... 23 24

Comments to this Manuals

No comments